Removing Brake Cables

Fig 1: Removing Centre Console Insert

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 1.1. Open the lid on the oddments tray.
2. 1.2. Remove center console insert at the rear -1-  (-arrow-  ).

Fig 2: Identifying Centre Console Floor Mounting Bolts

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 2.1. Unscrew fastening screws -1-  and remove center console floor at the rear -2-  .

Turn the lever -3-  and disengage brake cables -1-  .

Fig 3: Identifying Brake Cables And Handbrake Lever

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 4.1. Pull brake cables -1-  out slightly.
2. 4.2. Prise circlip -6-  off the bolt -7-  and remove it.
3. 4.3. Pull out the bolt -7-  and remove expanding-lock -8-  .

Fig 4: Identifying Brake Cables At Expanding-Lock

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. 5.1. Pull brake cables -1-  out of the guide tubes -5-  at the wheel bearing housing -arrow-  .
2. 5.2. Pull brake cables -1-  out of the guide tubes at the underbody.
3. 5.3. Clean the guide tubes -5-  at the wheel bearing housing.

Fig 5: Removing Brake Cables

Courtesy of PORSCHE CARS NORTH AMERICA, INC.