LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Cayenne S >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> 47 - Brakes - Hydraulic Brake System, Regulator >> WM 471519 Removing And Installing Brake Master Cylinder (HBZ) (All Models) >> Subsequent Work

Subsequent Work

  1. Fit the right and the rear covers → Installing front trim (engine compartment) and the cowl panel → Installing cowl panel cover .
  2. Install both wiper arms → Installing wiper arms .
  3. Bleed the vehicle → Bleeding The Brake System  .

    After the bleeding operation, do not top up the brake fluid level above MAX 

    Fig 1: Identifying Brake Fluid Reservoir Marking
    G09419715Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Calibrate the pressure sensor with the Porsche System Tester.
scientia non olet · About LEMON Manuals