LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Cayenne GTS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (38 - Automatic Transmission - Gears, Control) >> WM 387719 Removing And Installing ELECTROHYDRAULIC Control Unit (Cayenne Man, Cayenne S Man, Cayenne GTS Man, Cayenne TRANSSYBERIA Tip, Cayenne TRANSSYBERIA Man, Cayenne GTS Tip "PORSCHE Design Edition 3") >> Removing The Electrohydraulic Control Unit

Removing The Electrohydraulic Control Unit

WARNING: This page is about a different variant/trim than selected.
  1. Remove electrohydraulic control unit. To do this, unscrew fastening screws -arrows-  and remove the control unit.
    Fig 1: Locating Control Unit Fastening Screws
    G09410786Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals