Removing Sealing Ring For Output Shaft

WARNING: This page is about a different variant/trim than selected.

Fig 1: Overview Of Sealing Ring

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screw countersunk head bolt and bolt adapter from slide hammer kit Nr.168 into sealing ring -arrow- .

Fig 2: Screwing Screws Into Sealing Ring
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Screw on slide hammer from slide hammer kit Nr.168 and remove sealing ring -illustration- .

Fig 3: Overview Of Sealing Ring
Courtesy of PORSCHE CARS NORTH AMERICA, INC.