Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Inductive pickup for output shaft | in transmission | Tightening torque | 7.5 ftlb. | ||
| Electrohydraulic control unit | in transmission | Initial tightening | 6 ftlb. | ||
| Electrohydraulic control unit | in transmission | Final tightening | 90 Winkel-Grad | ||
| ATF temperature sensor | to control unit | Tightening torque | 7.5 ftlb. | ||
| Plug for wiring harness | to transmission | Tightening torque | 7.5 ftlb. | ||
| Oil inspection plug | to ATF pan | Tightening torque | 52 ftlb. |