Reworking ATF Pan

WARNING: This page is about a different variant/trim than selected.

Information

Modified ATF filling capacities in the transmission in combination with new control units.
Observe → "Technische Information 01/04 Gruppe 3" and numbers on transmission and control unit.

Check and if necessary, top up the ATF. → 370235 CHECKING AND TOPPING UP ATF
Install shield on ATF pan. To do this, tighten the two fastening screws -arrows- . → Tightening torque: 10 Nm (7.5 ft lbs.)

Fig 1: Identifying Shield On Transmission
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fit engine guard. → Installing engine guard