Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Transmission cross member | to transfer gear holder | Initial tightening | 50 Nm (37 ft lbs.) | ||
| Transmission cross member | to transfer gear holder | Final tightening | 90° | ||
| Transmission cross member | to body | Initial tightening | 50 Nm (37 ft lbs.) | ||
| Transmission cross member | to body | Final tightening | 90° |