LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Cayenne GTS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (37 - Automatic Transmission - Actuation, Ass. Housing) >> WM 374019 Removing And Installing Transmission Mount (Cayenne S Man, Cayenne GTS Tip "PORSCHE Design Edition 3") >> Removing Transmission Mount

Removing Transmission Mount

WARNING: This page is about a different variant/trim than selected.
  1. Mark the centre of the rubber mounting on the transmission cross member with a coloured marker -arrow-  . The tool T10214/3 Nr.1  may be used here as an aid.
    Fig 1: Locating Mark On Transmission Mount
    G09410710Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Press out the old rubber mounting on the workshop press using special tool T10214/3 and T10214/4 Nr.1.  To do this, place the transmission cross member on tool T10214/1. Tool T10214/3  must be centred on the mount, do not screw in, and press out transmission mount.
    Fig 2: Pressing Out Transmission Mount
    G09410711Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals