LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Cayenne GTS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (37 - Automatic Transmission - Actuation, Ass. Housing) >> WM 374019 Removing And Installing Transmission Mount (Cayenne S Man, Cayenne GTS Tip "PORSCHE Design Edition 3") >> Preliminary Work For Transmission Mount

Preliminary Work For Transmission Mount

WARNING: This page is about a different variant/trim than selected.

Information 

Always observe the exact work sequence when installing/removing the transmission cross member.

  1. Remove transmission cross member.
  2. Support transmission with transmission jack and secure with retaining band.
  3. Unscrew bolts on body -A-  .
    Fig 1: Identifying Transmission Cross Member
    G09410709Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Unscrew two transmission cross member screws -B-  on transfer gear holder.
  5. Remove transmission cross member.
scientia non olet · About LEMON Manuals