Removing And Installing Cable Adjustment

Information 

• When a new selector support is used, the cable adjustment of the selector cable must be modified. 

1. Remove pins -direction of arrow-  and take out cable adjustment.
   Fig 1: Removing Cable Adjustment

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Insert cable adjustment on the new selector support and install pins -direction of arrow-  .
   Fig 2: Inserting Cable Adjustment On Selector Support

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. When doing so, ensure that the opening for the adjusting screw -arrow-  is turned upwards.
   Fig 3: Locating Cable Adjustment

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.