LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Cayenne Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 - Exhaust Gas Turbocharging >> WM 219019 Removing And Installing Boost Pressure Sensor >> Installing Boost Pressure Sensor

Installing Boost Pressure Sensor

  1. Insert boost pressure sensor into the Y-pipe and install screw.
  2. Connect boost pressure sensor connector -position arrow-  .
    Fig 1: Locating Boost Sensor Connector
    G09410004Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals