Installing Intake Manifold

Information 

If you find leaks at the connection point between the intake manifold and turbocharger (drops of engine oil), the intake manifold and screw-type clamp must be replaced.

1. If there is dirt or dust under the intake manifold, clean the affected components.
2. Fit the intake manifold on the turbocharger using a new screw-type clamp.
3. Complete the connections on the intake manifold and tighten the screw-type clamp to the specified tightening torque. -2-  → Tightening torque: 7 Nm (5 ft lbs.) 
   Fig 1: Identifying Intake Manifold On Turbocharger

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.