LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Cayenne Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> 94 - Lights, Lamps, Switches, Exterior >> WM 944719 Removing And Installing Hazard Warning Light Switch (All Models) >> Installing Hazard Warning Light Switch

Installing Hazard Warning Light Switch

  1. Insert connector through the opening in the retaining bracket and push connector onto the hazard warning light switch until it is felt to engage.
    Fig 1: Plugging In Connector
    G09415380Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    • The retaining clips must engage. 
  2. Slide the switch into the retaining bracket until it clicks into place.
    Fig 2: Installing Hazard Warning Light Switch
    G09415381Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals