Installing Tail Light
- Install tail light.
- 1.1. Push connector -4-
onto the tail light -1-
(-Arrow A-
) until it engages securely -4-
.
Information
- Check condition of clip nut and replace it if necessary.
- 1.2. Press tail light -1- with the ball head -2- into the clip nut -3- and position it on the body.
- 1.1. Push connector -4-
onto the tail light -1-
(-Arrow A-
) until it engages securely -4-
.
- Tighten fastening screws -2- and press in caps -1- .