Disassembling Bi-Xenon Headlights
NOTE:
Voltage peaks
- Risk of damage to load or to the control unit
→ Remove the ignition key and switch off load before disconnecting or removing load.
Information
- The following parts are not included in the scope of spare parts for headlights and must be taken from the damaged headlight and re-fitted in the new headlight. If any of the parts to be re-fitted are damaged, these must also be replaced.
- Remove main headlight → Removing Main Headlights .
- Remove control unit for gas discharge lamp → Removing Control Unit For Gas-Discharge Headlight .
- Remove gas discharge lamp → Removing Gas-Discharge Headlight .