LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Boxster S, Standard >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - 987 - BOXSTER & CAYMAN >> WM 536155 Replacing Inner Side Section (All Models) >> Installing Inner Side Section >> Installing Rear Inner Side Section

Installing Rear Inner Side Section

  1. Fitting rear inner side section to the body
    1. 1.1. Fit the rear inner side section to the body and fix in place with tensioning clamps.
  2. Welding in rear inner side section
    1. 2.1. Plug-weld the rear inner side section in areas -A-  and -B-  using inert gas.
    2. 2.2. Resistance spot-weld the rear inner side section in area -C-  .
    Fig 1: Identifying Welding Rear Inner Side Section Area (A And B)
    G09589468Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Welding in rear inner side section
    1. 3.1. Resistance spot-weld the rear inner side section in area -A-  .
    Fig 2: Identifying Welding Rear Inner Side Section Area (A)
    G09589469Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Install outer rear wheel housing. → Installing Outer Rear Wheel Housing 
scientia non olet · About LEMON Manuals