LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Boxster S, Standard >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - 987 - BOXSTER & CAYMAN >> WM 536155 Replacing Inner Side Section (All BOXSTER Models) >> Preparing Connection Areas Of The Body For Installing The Inner Side Section >> Preparing Connection Areas Of The Body For Installing The Rear Inner Side Section

Preparing Connection Areas Of The Body For Installing The Rear Inner Side Section

  1. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked areas -A-  and -B-  using a hot-air gun or rotary brush. Grind the connecting flanges until bare.
    Fig 1: Identifying Welding Cleaning Area (A And B)
    G09589486Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Coating spot-weld flange areas with zinc powder paint
    1. 2.1. Coat spot-weld flange areas with zinc powder paint.
scientia non olet · About LEMON Manuals