Installing Front Inner Side Section

Fitting front inner side section to the body
1. 1.1. Fit the front inner side section to the body and fix in place with tensioning clamps.
Welding in front inner side section
1. 2.1. Resistance spot-weld the front inner side section in area -A- .
Fig 1: Identifying Welding Front Inner Side Section Area (A)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Welding in front inner side section
1. 3.1. Apply a full weld to the front inner side section in areas -A- and -B- from inside using an inert-gas arc welder.
Fig 2: Identifying Welding Front Inner Side Section Area (A And B)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install center side member. → Installing Center Side Member