LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Boxster S, Standard >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - 987 - BOXSTER & CAYMAN >> WM 534855 Replacing Rear Side Member (Section) (All Models) >> Installing Rear Side Member (Section) >> Subsequent Work For Body Repairs

Subsequent Work For Body Repairs

  1. Removing vehicle from alignment bench
  2. Cleaning spot-welded joints and sheetmetal flanges with a wire brush
  3. Priming flange areas with 2K primer
  4. Restore standard sealing with body sealant

    → WM 5X00IN SEAM SEALS (ALL MODELS)

  5. Restore standard undersealing with underbody sealant

    → Diagram: Underbody Protection

  6. Painting repair area and adjacent surfaces, if necessary
  7. Install removed accessories in the repair area
  8. Applying cavity preservation
scientia non olet · About LEMON Manuals