Removing Door Hinge (On Body Side)

Fig 1: Identifying Door Hinge Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Remove the wing. → REMOVING THE WING
Remove door. → Removing Door
Separating inert-gas welded seams
1. 3.1. Separate inert-gas welded seams in areas -A- and -B- using a parting grinder or spherical cutter.
  
  Fig 2: Separating Inert-Gas Welded Seams
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Separating inert-gas welded seams
1. 4.1. Separate inert-gas welded seams in areas -A- and -B- using a parting grinder.
  
  Fig 3: Separating Inert-Gas Welded Seams
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.