LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Boxster S, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> 72 - Seat Frames -- 987-BOXSTER-CAYMAN >> WM 723619 Removing And Installing Motor For Lumbar Support (All Models) >> Checking Seat Following Removal

Checking Seat Following Removal

  1. Connect the removed seat to the vehicle's wiring harness via test cable 9745 and test cable 9745/1.
  2. Connect electric plug to control module trim panel. → Installing Control Part Trim Panel 
  3. Connect the battery. → 2706IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY
  4. Switch on ignition.
  5. Carry out a function check on the seat components.
  6. Switch off ignition after function test and disconnect battery.
  7. Disconnect test cable 9745 and test cable 9745/1.
scientia non olet · About LEMON Manuals