LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Boxster Base, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 42 - Rear Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN >> WM 427119 Removing And Installing Rear Spring Strut (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Subsequent Work After Installing Spring Strut

Subsequent Work After Installing Spring Strut

  1. Install rear wall cover → INSTALLING REAR WALL COVER .
    Fig 1: Locating Rear Wall Cover Grommet Mounting Bolt
    G09587636Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Fit rear wheel → INSTALLING WHEEL .
  3. On the Boxster  , move convertible top out of service position → 6101IN CONVERTIBLE-TOP SERVICE POSITION .

    On the Cayman:  Install trim panel for spring strut mount → INSTALLING TRIM PANEL FOR SPRING STRUT MOUNT . This includes installing the following: trim panel for rear → INSTALLING REAR COVER and C-pillar → 706819 REMOVING AND INSTALLING C-PILLAR TRIM .

  4. If new parts are installed that affect vehicle height, suspension alignment must always be carried out → 449503 SUSPENSION ALIGNMENT, COMPLETE .
scientia non olet · About LEMON Manuals