LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Boxster Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> 66 - Exterior Equipment -- 987-BOXSTER-CAYMAN >> WM 660719 Removing And Installing Front Logo (All Models) >> Installing Front Logo

Installing Front Logo

  1. Always replace fastening nuts -3-  . Insert base -2-  and logo -1-  into the lid and secure with new fastening nuts -3-  . → Tightening torque: 1.3 Nm (1.0 ftlb) 
    Fig 1: Installing Front Logo
    G09590949Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Close front lid.
scientia non olet · About LEMON Manuals