LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2009 >> Boxster Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> 90 - Instruments -- 987-BOXSTER-CAYMAN >> WM 903519 Removing And Installing Gateway Control Unit (All Models) >> Removing Gateway Control Unit

Removing Gateway Control Unit

Information 

The Gateway Control Unit Is Located Underneath The Plenum Panel.

Fig 1: Identifying Gateway Control Unit
G09593097Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Switch Off Ignition And Remove Ignition Key.
  2. Unscrew The Three Fastening Screws -1-  On The Cover.
    Fig 2: Removing Cover
    G09593098Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Turn The Cover And Control Unit Around.
  4. -A-  Pull (Unclip) The Gateway Control Unit Out Of The Cover At The Connector Side.
  5. -B-  Pull The Gateway Control Unit To The Left Out Of The Holder.
    Fig 3: Removing Gateway Control Unit
    G09593099Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  6. Release Electric Connector -A-  And Pull It Off The Gateway Control Unit.
    Fig 4: Releasing Electric Connector
    G09593100Courtesy of PORSCHE CARS NORTH AMERICA, INC.