Gap Dimensions, Body Rear

Information

Set gap dimensions on the lids, doors and covers or accessories in accordance with the gap specifications .
If the clearance in the opening is too great or too small, the movable body or the accessories must be centred accordingly .
Ensure that the gaps do not taper or do not narrow at local points .
The given values are guidelines which should be observed as far as possible .
The guidelines apply to repair and assembly work .
Use star gauges to check the gap dimensions , Star gauges for body gap dimensions NR.127-1

Fig 1: Identifying Tail Light To Outer Side Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Tail light to outer side panel	Tail light only recessed	gap dimension A	4 mm	+/-1.5 mm
Tail light to outer side panel		gap dimension B	1 mm

Fig 2: Identifying Tail Light To Centre Side Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Tail light to center side panel		gap dimension A	3 mm	+/-0.8 mm
Tail light to center side panel	Tail light only recessed	gap dimension B	0.5 mm

Fig 3: Identifying Tail Light To Rear Apron

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Tail light to rear apron		gap dimension A	4 mm	+/-1.5 mm

Fig 4: Identifying Tail Light To Inner Rear Apron

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Tail light to inner rear apron	Centre gap	gap dimension A	4 mm	+/-1.5 mm

Fig 5: Identifying Rear Spoiler To Rear Apron

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Rear spoiler to rear apron		gap dimension A	5 mm	+/-1 mm

Fig 6: Identifying Rear Spoiler To Rear Lid

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Rear spoiler to rear lid		gap dimension A	6 mm	+/-1 mm

Fig 7: Identifying Inner Rear Apron To Side Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Inner rear apron to side panel	Flush	gap dimension

Fig 8: Identifying Outer Rear Spoiler To Rear Apron

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Outer rear spoiler to rear apron		gap dimension A	4.5 mm	+/-1 mm

Fig 9: Identifying Rear Lid To Rear Apron

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Rear lid to rear apron	Flush	gap dimension A	4 mm	+/-0.7 mm

Fig 10: Identifying Rear Lid To Side Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Rear lid to side panel	Flush	gap dimension A	4 mm	+/-0.5 mm

Fig 11: Identifying Rear Lid To Outer Roof Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Rear lid to outer roof panel	Flush	gap dimension A	4 mm	+/-0.5 mm

Fig 12: Identifying Rear Lid To Side Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Rear lid to side panel	Rear lid only recessed	gap dimension A	4 mm	+/-0.5 mm
Rear lid to side panel		gap dimension B	3.6 mm	-1 mm

Fig 13: Identifying Rear Lid To Rear Window

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Rear lid to rear window	Right and left gaps uniform	gap dimension A	3 mm	+/-0.5 mm
Rear lid to rear window	On all sides	gap dimension B	3 mm	+/-0.5 mm