LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayman Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> 70 - Linings, Insulation -- 987-BOXSTER-CAYMAN >> WM 709119 Removing And Installing Rear Lid Hinge Trim (All Models) >> Removing Rear Lid Hinge Trim

Removing Rear Lid Hinge Trim

Fig 1: Identifying Installation Position Of Rear Lid Hinge Trim
G09591994Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Move rear lid to service position. → MOVING REAR LID TO SERVICE POSITION
  2. Unclip lid hinge trim -1-  on the right and left in direction of arrow.
    Fig 2: Removing Lid Hinge Trim
    G09591995Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Release lid hinge trim -1-  from the roof area and remove it in an upward direction.
    Fig 3: Removing Lid Hinge Trim
    G09591996Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Check clamps -1-  and replace them if necessary.
    Fig 4: Identifying Clamps
    G09591997Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Loosen and remove adhesive residue on the roof using silicone remover.