Removing Roof Lining
- Unclip cap on the mounting saddle -1- with a screwdriver and open -arrow A- .
- Unscrew fastening screw -2- and remove mounting saddle -3- -arrow B- .
- Carefully insert a screwdriver between headliner and pivot bearing and release cover -4- -arrow C- .
- Unscrew fastening screw -5- and remove pivot bearing -6- -arrow D- .
- Unclip clamps -1- out of the cowl panel frame in the front area.
- Unclip fixing clip -2-
from the bodyshell in the rear area and loosen Velcro fasteners -3-
.
Information
Two persons are needed to remove and install the headliner!
- Carefully take out headliner -1- toward the rear through the tailgate opening.
- Check clamps -1- and fixing clip -2- of headliner -3- for deformation, replace if necessary.
- Check Velcro fasteners -4- and replace if necessary.