LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayman Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> 66 - Exterior Equipment -- 987-BOXSTER-CAYMAN >> WM 665019 Removing And Installing Rear Logo (All Models) >> Replacing Model Logo >> Replacing Boxster S Model Logo

Replacing Boxster S Model Logo

  1. Find the center of the lid.
  2. Position logo -Boxster S-  on the lid with the dimensions -A - → Gap dimension: 174.1 mm+/-1 mm  and -C- → Gap dimension: 55.9 mm+/-1 mm  and stick it on.
  3. Position logo -S-  on the rear lid with the dimensions -B- → Gap dimension: 174.1 mm+/-1 mm  and -D- → Gap dimension: 50.4 mm+/-1 mm  and stick it on.
Fig 1: Identifying Boxster S Logo Dimension
G09591012Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals