Removing The Rear Logo

Heat the rear lid
1. 1.1. Heat the rear lid -1- in the area of the logo -2- using the hot-air gun v.a.g 1416 -3- .
  
  Fig 1: Heating Rear Logo
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Lifting up the logo using a plastic wedge
1. 2.1. Move a plastic spatula -1- under the logo -2- and lift it up.
  
  Fig 2: Lifting Up Logo
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clean the cover
1. 3.1. Loosen the adhesive residue -1- on the cover -2- using a silicone remover and remove it.
  
  Fig 3: Cleaning Logo Cover
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.