LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Memory Seat Adjustment) >> Fault overview

Fault overview

WARNING: This page is about a different car, the 2006 Porsche Cayenne, 2005 Porsche Cayenne, 2004 Porsche Cayenne, and 2003 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
FAULT CODE REFERENCE CHART

Fault code Fault text Effect of fault
0003  Control unit faulty
  • Control module does not operate
0455  KESSY control module (CAN comfort)
  • After opening with the radio remote control unit, the driver's seat does not move to the stored position
0457  Vehicle electrical system control module (CAN comfort)
  • None
0466  Steering column switch (with electronic unit)
  • The electric steering column adjustment unit fails to operate
0538  Reference voltage (Hall-effect sensors)
  • Motors are only run for approx. two seconds (button operation)
0668  Vehicle voltage, Terminal 30
  • Does not operate
1317  Instrument cluster
  • Cannot communicate with instrument cluster control module
  • No output of acknowledgment tone
1330  Rear comfort system control module
  • No communication with the rear comfort system control module
1331  Driver's door control module
  • No communication with the driver's door control module
  • Cannot return to stored mirror position
1332  Passenger door control module
  • No communication with the passenger door control module
  • Cannot return to stored mirror position
1336  CAN comfort OFF
  • Limited operation possible
1893  Potentiometer signal for seat belt height adjustment
  • Electric set belt height adjustment not possible
1895  Horizontal steering column adjustment motor
  • The steering column adjustment cannot be moved horizontally
1896  Axial steering column adjustment motor
  • The steering column adjustment cannot be moved axially
1897  Horizontal steering column adjustment sensor (Hall-effect sensor)
  • Motor for horizontal steering column adjustment only runs for approx. two seconds
1898  Axial steering column adjustment sensor (Hall-effect sensor)
  • Motor for axial steering column adjustment only runs for approx. two seconds
1901  Vertical lumbar adjustment motor
  • Vertical lumbar adjustment motor does not operate
1902  Horizontal lumbar adjustment motor
  • The horizontal lumbar adjustment module does not operate
1913  Motor for seat belt height adjustment
  • Electronic set belt height adjustment not possible
1915  Vertical lumbar height adjustment sensor (Hall-effect sensor)
  • Adjustment only possible in inching mode for approx. two seconds
1916  Sensor for lumbar height adjustment, horizontal (Hall-effect sensor)
  • Adjustment only possible in inching mode for approx. two seconds
2005  Coding pin
  • Limited operation possible
2323  Reference voltage button block
  • The button does not operate
2324  Fore-and-aft adjustment button
  • The fore-and-aft adjustment button does not operate
2325  Seat angle adjustment button
  • The seat angle adjustment button does not operate
2326  Seat height adjustment button
  • The seat height adjustment button does not operate
2327  Seat angle adjustment sensor (Hall-effect sensor)
  • Adjustment only possible in inching mode for approx. two seconds
2328  Seat height adjustment sensor (Hall-effect sensor)
  • Adjustment only possible in inching mode for approx. two seconds
2329  Seat angle adjustment motor
  • The seat angle adjustment motor does not operate
2330  Seat height adjustment motor
  • The seat height adjustment motor does not operate
2331  Backrest angle adjustment button
  • The backrest angle adjustment button does not operate
2332  Backrest angle adjustment sensor (Hall-effect sensor)
  • Adjustment only possible in inching mode for approx. two seconds
2333  Backrest angle adjustment motor
  • The backrest angle adjustment motor does not operate
2335  Lumbar vertical adjustment button
  • The lumbar vertical adjustment button does not operate
2336  Lumbar horizontal adjustment button
  • The lumbar horizontal adjustment button does not operate
2337  Seat belt height adjustment button
  • The seat belt height adjustment button does not operate
2340  Fore-and-aft adjustment motor
  • The seat fore-and-aft adjustment motor does not operate
2341  Fore-and-aft adjustment sensor (Hall-effect sensor)
  • Adjustment only possible in inching mode for approx. two seconds
2344  Seat position memory button
  • The seat position memory button does not operate
2345  Memory position 1 button
  • The Memory position 1 button does not operate
2346  Memory position 2 button
  • The Memory position 2 button does not operate
2347  Memory position 3 button
  • The Memory position 3 button does not operate
scientia non olet · About LEMON Manuals