Fault code 0576: Diagnosis/troubleshooting
DIAGNOSIS/TROUBLESHOOTING CHART
| Work instruction | Display OK | If not OK | ||
|---|---|---|---|---|
| 1 | Check line for short circuit to B+ 'terminal 15': |
|
< 0.3 V Go to Step 2 |
Repair / replace wiring harness → End |
| 2 | Check line for short circuit to ground 'terminal 15': |
|
∞ Ω Go to Step 3 |
Repair / replace wiring harness → End |
| 3 | Check line for open circuit 'terminal 15': |
|
< 5 Ω Go to Step 4 |
Repair / replace wiring harness → End |
| 4 | CAN test:
|
Go to Step 5 | Repair / replace CAN wiring harness → End |
|
| 5 | Replace vehicle electrical system control module
|
→ End | ||