LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 15 - Engine - Cylinder Head, Valve Control >> WM 158219 Removing And Installing Cylinder Head Cover On V6 DFI Engines (Cayenne Tip, Cayenne Man) >> Removing Cylinder Head Cover

Removing Cylinder Head Cover

  1. Remove cylinder head cover.
    1. 1.1. Unscrew oil cap.
    2. 1.2. Unscrew all fastening screws -3-  .
    3. 1.3. Lift off cylinder head cover (valve cover) and set it down on a clean surface.
      Fig 1: Identifying Cylinder Head Cover, Oil Cap And Screws
      G09409234Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals