Removing Vibration Balancer (Crankshaft Pulley)

→ Only use tools approved by Porsche.

→ Always ensure that the tool is seated correctly.

→ Protect the body and interior of the vehicle from damage with protective covers.

→ Cover delicate components with cardboard or sheetmetal panels.

1. Block the vibration balancer using a brace T10069  and loosen the hexagon-head bolt (a/f 27).
   Fig 1: Loosening Vibration Balancer Hexagon-Head Bolt

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Unscrew the hexagon-head bolt and remove the vibration balancer by pulling it forward.
   Fig 2: Identifying Vibration Balancer

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.