LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons >> WM 137319 Removing And Installing Belt TENSIONER On DFI Engines (Except Cayenne Diesel, Cayenne GTS Tip "PORSCHE Design Edition 3") >> Installing Belt Tensioner

Installing Belt Tensioner

  1. Screw a screw (M8 x 50) into the new belt tensioner until the belt tensioner is slightly tensioned. -arrow- 
    Fig 1: Locating Belt Tensioner
    G09409046Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Fit belt tensioner.
  3. Tighten fastening screws for the belt tensioner. -arrows-  → Tightening torque: 25 Nm (19 ft lbs.) 
    Fig 2: Locating Belt Tensioner Mounting Bolts
    G09409047Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals