Installing Engine Carrier
- Install engine carrier. To do this, first fit and tighten the fastening screws (M10) -arrows-
on the hydraulic mounts → Tightening torque: 60 Nm (44 ft lbs.)
. Then tighten the fastening nuts -A-
if necessary. Threaded connection securing hydraulic mount to engine carrier → Tightening torque: 75 Nm (56 ft lbs.).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Tighten new fastening screws securing the engine carrier to the body. → Initial tightening: 120 Nm (89 ft lbs.)
→ Torque angle: 180°