Installing Front Trim (Engine Compartment)

Fig 1: Identifying Front Trim (Engine Compartment)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Install front trim panel on right and left.
   1. 1.1. Insert front trim panel on right and left -1a, 1b-  underneath the lid seal and position in engine compartment.
   2. 1.2. Position fixing clips -2-  on support in direction of the click stops and press into the supports.
      Fig 2: Installing Front Trim Panel On Right And Left

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Install rear trim panel.
   1. 2.1. Insert rear trim panel -3-  underneath the lid seal and position in engine compartment.
   2. 2.2. Position fixing clip -2-  on the support in the direction of the click stops and press support in.
      Fig 3: Installing Rear Trim Panel

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Install trim panel on the left.
   1. 3.1. Insert trim panel on the left -4-  underneath the lid seal and position in engine compartment.
   2. 3.2. Position the fixing clips -2-  on the supports in the direction of the click stops and press into the supports.
      Fig 4: Installing Trim Panel On Left

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Install trim panel on the right.
   1. 4.1. Insert trim panel on the right -6-  underneath the lid seal and position in engine compartment.
   2. 4.2. Position the fixing clips -2-  on the supports in the direction of the click stops and press into the supports.
   3. 4.3. Screw in fastening screw -5-  at filler neck of washer-fluid reservoir.
   4. 4.4. Position lid of washer fluid container at filler neck and close lid.
      Fig 5: Installing Trim Panel On Right

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.