Installing Rear Skirt
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Install cover for exhaust system.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 1.1. Position cover for exhaust system -1-
on the rear skirt (upper part) -2-
and slide it in -arrow-
until the retaining pivots lock with an audible click.
- Install cover for towing lug.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 2.1. Position cover for towing lug -1-
(-arrow A-
) and press it in -arrow B-
until the locking lugs click into place.
- Install rear skirt (upper part).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 3.1. Position rear skirt (upper part) -2-
on the rear apron -3-
and slide it in -arrow A-
until the retaining pivots engage securely -arrow B-
.
- 3.2. Press in retaining clips -1-
(-arrow C-
).
- Install rear skirt (lower part).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 4.1. Position rear skirt (lower part) -1-
on the rear skirt (upper part) -2-
and slide it in -arrow A-
until the retaining pivots engage securely -arrow B-
.
- 4.2. Screw in fastening screws -2-
on the rear skirt (lower part) -3-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 4.3. Push on retaining clips -1-
(-arrow-
).
- Install covering frame.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 5.1. Position covering frame -2-
on the rear apron -arrow A-
and press it in -arrow B-
.
- 5.2. Screw in fastening screws -1-
.
- Install heat protection panel.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 6.1. Position heat protection panel -3-
on the covering frame in -direction of arrow A-
and push on retaining clip -2-
(-arrow B-
).
- 6.2. Screw in fastening screws -1-
.