| Components |
|
Temperature |
17°C |
|
|
| Timing-case cover |
|
Length |
0.1 mm |
|
|
| Timing-case cover to crankcase and cylinder head |
M6 x 25 (23 ea.) |
Tightening torque |
13 Nm (9.5 ftlb.) |
|
|
| Inner timing-case cover to upper part of crankcase and cylinder head |
M6 x 50 (4 ea.) |
Tightening torque |
13 Nm (9.5 ftlb.) |
|
|
| Timing-case cover to cylinder head |
M6 x 50 (1 ea.) |
Tightening torque |
13 Nm (9.5 ftlb.) |
|
|
| Timing-case cover (chain tensioner position) to upper part of crankcase and cylinder head |
M8 x 50 (2 ea.) |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Fastening screw securing cable duct to timing-case cover, M6 |
|
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Fastening screw securing oil dipstick to timing-case cover, M6 |
|
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Deflection roller with timing-case cover to upper part of crankcase |
M10 x 90 (1 ea.) |
Tightening torque |
32 Nm (24 ftlb.) |
|
|
| Tensioner to lever |
M8 x 33 (1 ea.) |
Tightening torque |
32 Nm (24 ftlb.) |
|
|
| Tensioning roller to tensioning lever |
M10 x 28 (1 ea.) |
Tightening torque |
32 Nm (24 ftlb.) |
|
|
| Complete lever to timing-case cover and cylinder head |
M8 x 96 (1 ea.) |
Tightening torque |
32 Nm (24 ftlb.) |
|
|
| Belt tensioner and timing-case cover to bracket |
M8 x 96 (1 ea.) |
Tightening torque |
32 Nm (24 ftlb.) |
|
|
| Deflection roller with timing-case cover to cylinder head |
M10 x 90 (1 ea.) |
Tightening torque |
32 Nm (24 ftlb.) |
|
|
| Coolant hose holder to timing-case cover |
M6 x 12 (1 ea.) |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Coolant return line to thermostat housing |
M6 x 20 (1 ea.) |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|