| Camshaft controller to intake camshaft |
M12, 1st stage (counter screw torque at hexagon sleeve) |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Camshaft controller to intake camshaft |
2nd stage (counter screw torque at hexagon sleeve) |
Tightening torque |
50 Nm (37 ftlb.) |
|
|
| Camshaft controller to intake camshaft |
3rd stage (counter screw torque at hexagon sleeve) |
Torque angle |
135° |
|
|
| Camshaft sprocket to outlet camshaft |
M12, 1st stage (counter screw torque at sprocket) |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Camshaft sprocket to outlet camshaft |
2nd stage (counter screw torque at sprocket) |
Tightening torque |
50 Nm (37 ftlb.) |
|
|
| Camshaft sprocket to outlet camshaft |
3rd stage (counter screw torque at sprocket) |
Torque angle |
90° |
|
|