| Connecting rod cap to connecting rod |
M9 x 56 (16 ea.) Step 1 Tightening sequence as synchronous as possible; use new bolts |
Tightening torque |
8 Nm (6 ft lbs.) |
+2 Nm (+1.5 ft lbs.) |
|
| Connecting rod cap to connecting rod |
M9 x 56 (16 ea.) Step 2 Tightening sequence as synchronous as possible; use new bolts |
Tightening torque |
20 Nm (15 ft lbs.) |
|
|
| Connecting rod cap to connecting rod |
M9 x 56 (16 ea.) Step 3 Tightening sequence as synchronous as possible; use new bolts |
Tightening torque |
40 Nm (30 ft lbs.) |
|
|
| Connecting rod cap to connecting rod |
M9 x 56 (16 ea.) Step 4 Tightening sequence as synchronous as possible; use new bolts |
Torque angle |
90° |
|
|
| Oil guide (oil plate) to lower part of crankcase |
M6 x 20 (6 ea.) |
Tightening torque |
10 Nm (7.5 ft lbs.) |
|
|