Installing Engine Mounting

Information 

• The engine mounts must be aligned using the engine carrier. 
• The engine mounts differ (left/right) and must not be interchanged. 

1. Install engine mounting.
   Fig 1: Locating Engine Mounting

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   1. 1.1. The dowel pin of the engine mounting must sit correctly into the cut-out on the engine carrier.
   2. 1.2. Fit fastening screws -arrows-  but do not tighten yet.
   3. 1.3. Always replace  the hexagon nut and tighten to → Tightening torque: 75 Nm (56 ft lbs.).  Fit the engine carrier to prevent the bearing from turning.