| Bracket for auxiliary units/engine mounting to lower part of crankcase |
M10 x 45 (9 ea.) |
Tightening torque |
65 Nm (48 ft lbs.) |
|
|
| Hydraulic mount to engine carrier |
M10 x 65 (2 ea.) |
Tightening torque |
60 Nm (44 ft lbs.) |
|
|
| Hydraulic mount to bracket for auxiliary units |
M12 nut |
Tightening torque |
75 Nm (56 ft lbs.) |
|
|
| Right engine carrier to crankcase |
M10 x 45 (6 ea.) |
Tightening torque |
65 Nm (48 ft lbs.) |
|
|
| Hydraulic mount to engine carrier |
M10 x 65 (2 ea.) |
Tightening torque |
60 Nm (44 ft lbs.) |
|
|
| Hydraulic mount to bracket for auxiliary units |
M12 nut |
Tightening torque |
75 Nm (56 ft lbs.) |
|
|
| Fastening screws on heat protection plate |
|
Tightening torque |
10 Nm (7.5 ft lbs.) |
|
|