Technical Values Descroption
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Engine mounting | Replace nuts | Tightening torque | 75 Nm (56 ft lbs.) | ||
| Engine mounting | Screws | Tightening torque | 60 Nm (44 ft lbs.) | ||
| Catalytic converter to exhaust manifold | M10 nuts | Tightening torque | 40 Nm (30 ft lbs.) | ||
| Sheetmetal holder between intake manifold and exhaust manifold | M8 screw | Tightening torque | 20 Nm (15 ft lbs.) | ||
| Coolant pipes to transmission | M6 | Tightening torque | 9 Nm (6.5 ft lbs.) | ||
| ATF line to oil pan | M6 screw | Tightening torque | 10 Nm (7.5 ft lbs.) |