LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Lubrication System >> 17 - Engine - Lubrication >> WM 175019 Removing And Installing Oil Pan And Oil Guide Housing On 4.8- Litre DFI Engines (Except Cayenne Tip, Cayenne Man, Cayenne Diesel) >> Information >> Component Overview

Component Overview

Fig 1: Identifying Oil/Coolant Heat Exchanger Components, Oil Filter
G09409587Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Oil guide housing
  2. Oil-filter housing
  3. Oil filter
  4. Oil-filter sealing ring
  5. Oil duct adapter (cannot be replaced)
  6. Heat exchanger seal
  7. Oil/coolant heat exchanger
  8. Screw, M6 x 20; self-tapping screws ex-works; metric screws can also be used
  1. Direction of travel
    Fig 2: Identifying Sealant Applying To Oil Guide Housing
    G09409588Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Sealant application (geometry, 1-mm bead of sealant)
  2. Sealant; Dreibond up to October 2008, Doboseal from October 2008 onwards
  1. Direction of travel
    Fig 3: Identifying Oil Guide Housing With Accessories
    G09409589Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Guide tube
  2. O-ring
  3. Screw, M6 x 16
  4. Oil dipstick
  5. O-ring
  6. M6 screw; timing-case cover to oil guide housing; oil-level sensor to oil guide housing; oil guide housing to lower part of crankcase
  7. Oil level sensor
  8. O-ring
  9. Sealing flange
  10. M6 screw
  11. M6 screw
  1. Direction of travel
scientia non olet · About LEMON Manuals