LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> 20 - Fuel Supply, Control >> WM 202519 Removing And Installing Carbon Canister On DFI Engines >> Removing Carbon Canister

Removing Carbon Canister

CAUTION:
  • Lines can become kinked or can crack.

→ Do not leave carbon canister hanging freely on the lines.

→ Secure carbon canister with wire.

  1. Loosen fastening screws (2x M6) and M6 nut.
  2. Carefully disconnect all lines on the carbon canister at the plug connections.
    1. 2.1. Also remove the vacuum line on vehicles with a leakage diagnosis pump.
  3. Remove wiring harness at the back of the carbon canister.
  4. Remove carbon canister.
scientia non olet · About LEMON Manuals