LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> 20 - Fuel Supply, Control >> WM 202519 Removing And Installing Carbon Canister On DFI Engines >> Installing Carbon Canister

Installing Carbon Canister

  1. Secure wiring harness at the back of the carbon canister.
  2. Fit all lines on the carbon canister at the plug connections.
  3. Secure carbon canister with M6 fastening screws and M6 nut. → Tightening torque: 9 Nm (6.5 ftlb.) 
scientia non olet · About LEMON Manuals