LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> 19 - Engine - Cooling >> WM 197819 Removing And Installing Coolant Temperature Sensor On 4.8-Litre DFI Engines (Except Cayenne Tip, Cayenne Man, Cayenne Diesel, Cayenne GTS Tip "PORSCHE Design Edition 3") >> Installing Coolant Temperature Sensor

Installing Coolant Temperature Sensor

  1. Fit and screw in the coolant temperature sensor. → Tightening torque: 30 Nm (22 ft lbs.) 
    Fig 1: Identifying Coolant Guide Components
    G09409762Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. Coolant pipe with sealing ring
    2. Coolant temperature sensor
    1. 9 - Coolant guide (collection pipe)
  2. Connect cable plug for temperature sensor -37-  . To do this, carefully pull the cable duct forward.
    Fig 2: Identifying Wire Harness Assignment
    G09409763Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 37 - Coolant temperature sensor
    2. A - Direction of travel
scientia non olet · About LEMON Manuals