| Thermostat housing to upper part of crankcase |
M6 x 25 (3 ea.) Observe tightening sequence |
Tightening torque |
10 Nm (7.5 ft lbs.) |
|
|
| Coolant sensor to collection pipe |
M14 x 1.5 (1 ea.) |
Tightening torque |
30 Nm (22 ft lbs.) |
|
|
| Heating coolant pipe to collection pipe |
M6 x 16 (2 ea.) |
Tightening torque |
12 Nm (9 ft lbs.) |
|
|
| Screw plug for collection pipe |
M16 x 1.5 (3 ea.) M48/01 (2 ea.) M48/51 |
Tightening torque |
30 Nm (22 ft lbs.) |
|
|
| Coolant collection pipe to upper part of crankcase |
M6 x 25 (8 ea.) |
Tightening torque |
12 Nm (9 ft lbs.) |
|
|
| Coolant hose holder to timing-case cover |
M6 x 12 (1 ea.) |
Tightening torque |
10 Nm (7.5 ft lbs.) |
|
|
| Coolant return line to thermostat housing |
M6 x 20 (1 ea.) |
Tightening torque |
10 Nm (7.5 ft lbs.) |
|
|