LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> 26 - Exhaust System >> WM 263419 Removing And Installing Tailpipes On DFI Engines (Includes Adjusting) (Cayenne S Tip, Cayenne S Man, Cayenne Turbo, Cayenne GTS Tip, Cayenne GTS, Cayenne Turbo S) >> Technical Values

Technical Values

Location Description Type Basic value Tolerance 1 Tolerance 2
Ball clamp on tailpipes Replace Tightening torque 35 Nm (26 ft lbs.) +/-3.5 Nm (+/- 2.5 ft lbs.)  
X = distance from upper part of rear apron   Gap dimension X 18 mm    
Y = work out distance at sides to the left and right uniformly   Gap dimension Y 20 mm    
X = distance from upper part of rear apron   Gap dimension X 18 mm    
Y = work out distance at sides to the left and right uniformly   Gap dimension Y 20 mm    
X = distance from upper part of rear apron   Gap dimension X 7 mm    
Y = work out distance at sides to the left and right uniformly   Gap dimension Y 7 mm    
Fastening screw securing cover to rear apron   Tightening torque 4.5 Nm (3.5 ft lbs.) +/-0.5 Nm (+/- 0.5 ft lbs.)  
scientia non olet · About LEMON Manuals