LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> 42 - Rear Wheel Suspension, Drive Shafts >> WM 420919 Removing And Installing Rear Tie Rod (Toe Control Arm) (All Models) >> Removing Rear Tie Rod

Removing Rear Tie Rod

Fig 1: Identifying Tie Rod (Toe Control Arm)
G09419049Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Mark the position of the toe eccentric for re-installation.
  2. Release tie rod at suspension sub-frame (eccentric screw) and at wheel carrier. Pull out tie rod.

    To make removal easier, raise wheel carrier slightly with universal jack! → see Fig 2 Use rubber base to prevent wheel carrier from slipping!

    Fig 2: Removing Wheel Carrier
    G09419050Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals